4MB 5V 1A DSTIKE WiFi Deauther Monster V6 ESP8266 Antenna PCB Main Board

Description

Welcome to smartway
4MB 5V 1A DSTIKE WiFi Deauther Monster V6 ESP8266 Antenna PCB Board Main Board
Description
Although it is pre-flashed I still suggest you follow instructions to reflash the newest software once. Because software keeps updating all the time. This product does not include 18650 battery. Hardware has RTC inside but time function is not avaliable in the exist software. Please wait update.
Compare to V5:
Charging current increased to 1A
Added Highlight LED controled by GPIO16
Added RTC DS3231
What is it?
This ESP8266 development board comes with an integrated 18650 charging system, OLED display and a 3 way momentary slide switch.
It comes installed with the latest ESP8266 Deauther software.
With this software, you can perform different attacks to test WiFi networks.
Please note that the ESP8266 does only support 2.4GHz. For more details on the software, visit:
github.com/spacehuhn/esp8266_deauther
.
You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.
GPIOs and Hardware info
Display: SH1106 1.3" OLED
Display SDA: GPIO 5 (D1)
Display SCL/SCK: GPIO 4 (D2)
WS2812b LED: GPIO 15 (D8)
Button Up: GPIO 12
Button Down: GPIO 13
Button Select: GPIO 14
Highlight LED: GPIO 16
RTC: DS3231 (RTC only work when you connect battery and now the pre-flashed deauther software does not use this)
Breakout Pins:
GPIO-16
GPIO-3(RXD)
GPIO-1(TXD)
GPIO-5(SDA)
GPIO-4(SCL)
GPIO-0
GPIO-2
3.3V
GND
5V
Why did you make it
I designed this development board specially for Spacehuhn's great project:
ESP8266 Deauther
It has been authorized by him and is officially supported.
Thanks to every customer that leaves feedback! I will keep improving this board.
What makes it special
Only 80~100mA power usage
Up to 35h of battery life with a 3500mAh 18650 cell
Charging current: 1A
Included 8dB antenna
Included 2 acrylic case
7 GPIO breakouts and 3.3 and 5V output
4 LEDs to indicate battery status in real time
Power button: Click to turn on, double click to turn off
Protection: short, over charging, over discharging, temperature, polarity
Added RTC DS3231
Added Highlight LED controlled by GPIO16
Disclaimer
Use it only for testing and educational purposes against your own devices!
I don't take responsibility for what you do with it.
Please check the legal regulations for your country to make sure you don't violate any laws.
Package List:
-1 x WiFi Deauther OLED V6
-1 x 10p Pin Header
-1 x 8db Antenna
-8 x Screw
-1 Set of Support
-2 x Arcylic Case
-1 x Battery Connector
-1 x Battery Wire
About us
1.Payment
We accept Paypal ONLY.
2.Shipping.
1).We ship to most of countries in the world. Item will be post to customer's ebay address within 1 working after payment arrive.
2).Item will be sent with tracking number when order value is over USD16. Or we'll ship order without tracking number.
3).Pls leave a note or send a message if any question.
3. Tax
Import duties, taxes and charges are not included in the item price or shipping and handling. These charges ore the buyer's responsibility.
4. Return
We understand that not every purchase is a good one for every custome
Please note that we only accept returns within 30 days after delivery.
a).If the item is defective/DOA (Dead on Arrival) we must be notified within 2 days of arrival, and a refund in full will be granted after item is sent back.
b).Returns after 30 days will not be accepted.
c).Please allow up to 3 business days for your item to be inspected and your return to be be processed.
5. Working Time
We work from Monday to Friday. We'll reply message within 24 hours during working time and 48 hours during vacation. We'll do best to solve problem, don't worry.
On Oct-16-20 at 11:36:04 PDT, seller added the following information:
On Jul-08-21 at 11:45:11 PDT, seller added the following information: