ADMP401 MEMS Microphone Breakout with OPA344, 1.5V to 3.3V DC

Description

ADMP401 MEMS Microphone Breakout with OPA344, 1.5V to 3.3V DC
Important Note on Shipping Delays via United States Postal Service: Currently we see significant delays in shipments via USPS, up to 3 weeks (!) to deliver within the USA. If you need your item fast, we suggest you select Fedex shipping upon checkout, instead of the standard USPS shipping.
BOB-09868
This tiny breakout board features the ADMP401 MEMS microphone. One of the key advantages to this breakout and microphone is the bottom ported input. This means the microphone's input can fit flush against the enclosure of your project. Plus, you will not have to deal with trying to solder the microphone's unusual footprint.
The amplifier on the breakout has a gain of 67 and more than meets the bandwidth requirements of the mic. The amplifier's AUD output will float at one half Vcc when no sound is being picked up. The amplifier produces a peak-to-peak output of about 200mV when the microphone is held at arm's length and is being talked into at normal conversational volume levels. So the AUD output easily can be connected to the ADC of a microcontroller.
ADM401 Microphone Board Features
-3dB roll off at 100Hz and 15kHz
1.5V to 3.3V DC supply voltage
Should put out 40mW comfortably
SNR of -62dBA