BLDC Three-Phase Sensorless Brushless With Hall Motor Controller DC 5-36V 350W

Description

BLDC Three-Phase Sensorless Brushless With Hall Motor Controller DC 5-36V 350W
Item Description
Product introduction:
BLDC wide voltage 5-35V high power 350W DC three-phase brushless with Hall controller, new PLC 0-5V analog quantity control speed control and forward and reverse control PWM duty cycle control speed control, the product is suitable for electric angle 120 DC brushless with Hall motor
Precautions：
1. There is no fuse in the power supply circuit on the motherboard. It is recommended to add it by yourself. Reverse connection of the positive and negative poles of the power supply will cause permanent damage to some of the chips on the board (even if it is not possible for 2 seconds)
2. There is sampling over-current protection at the output of the motor during normal operation. Since the power and current of the module are very large, please do not artificially short-circuit when the module is not working normally. Once the short-circuit occurs, the circuit may be burnt and the tube may burst. Please test the machine for the first time. Please use small current and low voltage test. After ok, apply high current and high voltage. Since it is a bare board module, please pay attention to the insulation of the wiring head. It is strictly forbidden to touch the board parts with strong voltage.
3. Do not connect the motor that is obviously inconsistent with the voltage, current and power of the drive module or is very different to avoid inexplicable damage
4. The motor can't start normally or it is difficult to start (sometimes it needs to manually rotate the motor to start), and the wiring phase may be wrong. Please cut off the power immediately, otherwise, it is easy to damage the drive instantly
Tips:
After receiving the goods, there are generally 5 Hall cables on the brushless motor. Two of them are Hall power cables and three are Hall signal cables. Please distinguish them, especially the power supply cables.
The order of the three Hall signal wires connected to the drive board must correspond to the order of the three phase wires on the motor drive board to work normally.
If you don’t know the definition of the Hall wires, you can use low voltage and low current when the power is turned on for the first time. Debugging, by slowly changing the order of the Hall wires several times until it works normally, do not debug with high current and high voltage. If the Hall wires are not connected in the correct order, test the machine with high voltage and high current, which may damage the MOS tube.
-If the three Hall signal wires are connected correctly, the motor runs silky smoothly, and the low-speed startup is stable and the torque is large;
-if the three Hall signal wires are not connected, they have the following characteristics:
1. The motor cannot start normally or it is difficult to start (sometimes required Manually turn the motor to start)
2. The motor starts jittering weakly and there is noise, and the power tube heats up seriously.
Package Included:
Hall driver X1
Payment Mathod
Returns Policy
Feedback
Payment Mathod
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Ple
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication
Feedback
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.We will maill bakc within 24hours