-40%

Bus Pirate 3.6a

$ 28.24

Availability: 10 in stock
  • UPC: Does not apply
  • EAN: 3183857604038
  • Brand: SparkFun
  • Condition: New
  • Refund will be given as: Money Back
  • MPN: 671
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Seller
  • Manufacturer Part Number: 671

    Description

    Brand New Bus Pirate 3.6a
    Manufacturer model:
    671
    0-5.5volt tolerant pins
    0-6volt measurement Pin
    1Hz - 40MHz frequency measurement
    1kHz - 4MHz pulse-width modulator, frequency generator
    On-board multi-voltage pull-up resistors
    Description
    Description
    : The Bus Pirate, created by Ian Lesnet and featured on Hack a Day, is a troubleshooting tool that communicates between a PC and any embedded device over most standard serial protocols, which include I2C, SPI, and asynchronous serial - all at voltages from 0-5.5VDC. This product eliminates a ton of early prototyping effort when working with new or unknown chips.
    Working with the Bus Pirate is simple and effective â€" type commands into a terminal on your computer, those commands are interpreted by the Bus Pirate and sent via the proper protocol. The Pirate will also interpret data sent from your embedded device back to your computer terminal. A big bonus is the bootloader installed on the PIC, which allows you to easily update the firmware and change the functionality of the board.
    The main components of the Bus Pirate are PIC24FJ64 processor and an FT232RL USB-to-Serial chip. A Mini-B USB connector is populated on the board, and when you plug it into your computer it will come up as a virtual COM port. The pinout of the 2×5 I/O header is documented here.
    Note:
    This product is a collaboration with Ian Lesnet. A portion of each sales goes back to them for product support and continued development.
    Features
    :
    Supported protocols:
    1-Wire
    I2C
    SPI
    JTAG
    Asynchronous serial
    MIDI
    PC keyboard
    HD44780 LCD
    2- and 3-wire libraries with bitwise pin control
    Scriptable binary bitbang, 1-Wire, I2C, SPI, and UART modes
    0-5.5volt tolerant pins
    0-6volt measurement probe
    1Hz â€" 40MHz frequency measurement
    1kHz â€" 4MHz pulse-width modulator, frequency generator
    On-board multi-voltage pull-up resistors
    On-board 3.3volt and 5volt power supplies with software reset
    Shipping and Handling
    Please allow 5-7 business days for the package to arrive, regardless of buyer location within the US.
    We will provide an online tracking number to you once the item has been shipped.
    It may take a few business days for our automated system to process the tracking number onto eBay. However, this will not affect the shipping times.
    Return Policy
    All our products are brand new and sealed. All items qualify for returns within 30 days of receipt.
    Feedback
    We take our reputation seriously. If you have any questions or concerns, please contact us and we will respond back to your message within 24 hours.