Dart 10024360 Iron Eagle Bare SBC Cylinder Head, 165cc/76cc

Description

Stock replacement, street and strip performance, or towing upgrade with mildly modified engines from idle to 5,500 RPM. Best for 305-383 cubic inch engines. Works with most standard components.
Dart Iron Eagle S/S 23° 165cc heads produce great throttle response and low to mid-range torque for street performance engines. Dart's precision cast ports and chambers produce outstanding air flow without time consuming porting. Dart S/S heads are legal in many racing sanctions with Iron head rules.
Heads are sold individually.
Material: Class 30 Grey Iron. Valve Angle: 23° (stock) Intake Port Volume: 165cc. Intake Valve: 1.940” Exhaust Valve: 1.500” Valve Guides: Integral Iron. Chamber Volume: 72cc. Plug Type: Straight. Bare Head.
Dart 10024360 Iron Eagle Bare SBC Cylinder Head, 165cc/76cc
Sku # 30424360
Mfr. Part # 10024360
Condition
New
Brand
Dart
Sold
Each
Details
Info
Stock replacement, street and strip performance, or towing upgrade with mildly modified engines from idle to 5,500 RPM. Best for 305-383 cubic inch engines. Works with most standard components.
Dart Iron Eagle S/S 23° 165cc heads produce great throttle response and low to mid-range torque for street performance engines. Dart's precision cast ports and chambers produce outstanding air flow without time consuming porting. Dart S/S heads are legal in many racing sanctions with Iron head rules.
Heads are sold individually.
Material: Class 30 Grey Iron
Valve Angle: 23
°
(stock)
Intake Port Volume: 165cc
Intake Valve: 1.940”
Exhaust Valve: 1.500”
Valve Guides: Integral Iron
Chamber Volume: 72cc
Plug Type: Straight
Bare Head
Charts
(PDF)
(PDF)
(PDF)
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Sold in Quantity
Each
Finish
Natural
Cylinder Head Style
Bare
Spark Plug Style
Straight
Material Type
Cast Iron
Combustion Chamber Volume
76cc
Intake Port Location
Standard
Intake Port Shape
Rectangle
Exhaust Port Shape
Square
Exhaust Port Location
Standard
Valve Cover Mounting Style
Center and Perimeter Bolt
Valve Seat Material
Ductile Iron
Oiling Style
Through Pushrod
Combustion Chamber Style
Heart
CNC-Machined Combustion Chamber
No
Intake Valves Included
No
Valve Spring Included
No
Damper Spring Included
No
Retainers Included
No
Locks Included
No
Rocker Arm Studs Included
No
Rocker Arm Nuts Included
No
Guideplates Included
No
Accessory Bolt Holes Drilled
Yes
Valve Seats Machined
Yes
Steam Holes Drilled
No
Machined for O-Ring
No
Heat Crossover
No
Valve Guides Included
Yes
Valve Stem Seals Included
No
Intake Valve Diameter
1.940
Exhaust Valve Diameter
1.500
Valve Seat Machine Style
4-angle intake/3-angle exhaust
Rocker Arms Included
No
Intake Runner Volume Range
160cc - 169cc
Exhaust Runner Volume Range
60cc - 69cc
Combustion Chamber Volume Range
70cc - 79cc
Exhaust Runner Volume
65cc
Intake Runner Volume
165cc
CNC-Machined Runners
No
Exhaust Valves Included
No
Exhaust Valve Angle
23
Intake Valve Angle
23
Valve Guide Material
Cast Iron
MFG. Part #
10024360
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.