For Raspberry Pi X850 mSATA SSD Hard Drive Expansion Board Ideal NAS Storage

Description

Description
For Raspberry Pi X850 mSATA SSD Hard Drive Expansion Board Ideal NAS Storage Solution Support 1TB
Products need to be used with X850 mSATA SSD hard drive expansion board:
- X850 expansion board (this product)
- For Raspberry Pi 3B+/3B (prepare by yourself)
- 2.5 inch mSATA hard disk (prepare by yourself)
- Micro SD card / TF card (prepare by yourself)
Description:
- X850 only supports MSATA SSD hard drives. It is an expansion board designed for Raspberry Pi storage.
- Suitable for Raspberry Pi 3B+/3B; (also suitable for ROCK 64 development board).
- Operating system: For Raspberry Pi operating systems.
- Power requirements: Your board for Raspberry Pi directly supplies power. External power supply is not needed.
Refer to More English Information:Please contact us fo r it ,thanks~
Upgrade Instructions:
- When X850 is used as the boot hard disk, the problem that reboot is not supported is solved;
- Supports installation under the motherboard for Raspberry Pi; retains GPIO; in fact, it can also be installed on the motherboard for Raspberry Pi (but you need to use m2.5x20 copper pillars, purchased separately from our store;)
- Same size as the size of the motherboard for Raspberry Pi
- Change power supply method (use Micro usb power supply to replace GPIO power supply, additional power supply may be needed only when using a large capacity hard disk)
- All use patch processing technology, product quality is more reliable.
Power Supply:
- Power supply via the motherboard for Raspberry Pi (additional power supply is only required when using a large-capacity hard drive)
Features:
- Supports up to 1TB mSATA SSD
- Support hard disk system installation and startup
- Reserve a Micro-USB power socket to facilitate additional power supply to a large-capacity mSATA SSD
- Powered via the USB port of the motherboard for Raspberry Pi, no external power supply required
- Using super high speed USB 3.0 to SATA to 6.0Gb/s bridge controller
- USB3.0 super high-speed connection to PC or MAC for data transmission
- USB2.0 high-speed data transfer with connection for Raspberry Pi
- No driver required, fully suitable for Raspberry Pi
- Ideal storage expansion solution for Raspberry Pi
- Special USB port connection board without any cable connection
- Easy to assemble by yourself
Package Included:
- 1 x X850 Expansion Board
- 1 x USB 3.0 Cable 60cm
- 1 x USB Connector
- 1 x Bag of Screws
Note:
- Assembling is needed.
- Motherboard for Raspberry Pi is not included.
- X850 expansion board is for mSATA SSD and HDD shown in the picture bellow. They are not included in the package, for demonstration purposes only.
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Sep-16-20 at 00:46:13 PDT, seller added the following information: