MINI-M0 for STM32: STM32F051R8 in DIP40 PIC16/PIC18 Pinout

Description

MINI-M0 for STM32: STM32F051R8 in DIP40 PIC16/PIC18 Pinout
MIKROE-1518
Replace your 40-pin PIC16 or PIC18 device with a pin-compatible ARM Cortex-M0
MINI-M0 for STM32 is a small development board containing an STM32F051R8 microcontroller. It is pin-compatible with PIC16F887 and PIC18(L)F45K20 microcontrontrollers and it fits perfectly into a standard DIP40 socket (after you install header pins yourself). The board is equipped with a
16 MHz
SMD crystal oscillator, and a
32.768 kHz
crystal which can be used for the internal RTCC module. It has a reset button and three signal LEDs.
The board comes preprogrammed with a fast USB-UART bootloader, so no external programmers are needed for development. It operates on 3.3V power supply. An on-board voltage regulator allows the board to be powered directly from the USB cable, or it can be powered via pads.
STM32 DIP40 Header Board Features
STM32F051R8, 32-bit ARM Cortex-M0 CPU running at up to 48 MHz with 64K Flash, 8K RAM, and an extensive range of enhanced peripherals and I/Os
USB-UART (FT230x), Signal LEDs, Crystal oscillator and Reset Button on board
RX and TX LEDs for monitoring UART communication
Pin compatible with PIC16F887 and PIC18(L)F45K20
Comes preprogrammed with USB bootloader
Fits into DIP40 socket (header pins, not included, must be installed first)
Dimensions: 50.80 × 17.78 mm (2 × 0.7 inches)
STM32 DIP40 Header Board Resources
MINI-M0 for STM32 User Manual
MINI-M0 Bootloader Application and Firmware
MINI-M0 for STM32 Software Examples
in
C
,
BASIC
and
Pascal
STMicroelectronics STM32F051R8 Page
with datasheet and other documentation
Timer Calculator Application
which generates STM32 code for setting up MCU timers easily