NB-IoT/Cat-M eMTC/GNSS HAT for Raspberry Pi Based on SIM7080G Global Application

Description

This auction is for
SIM7080G Cat-MNB-IoT HAT (EN)
NB-IoT/Cat-M(eMTC)/GNSS HAT for Raspberry Pi, Based on SIM7080G, Globally Applicable
Overview
This is a telecommunication HAT which features multi communication functionalities:
NB-IoT
(NarrowBand-Internet of Things),
Cat-M
(aka eMTC, enhanced Machine Type Communication), and
GNSS
(Global Navigation Satellite System).
With the developing of telecommunication technology LTE, 2G/3G networks are fading away, the future world would be dominated by IoT technologies consisting of low bandwidth NB-IoT/Cat-M and high bandwidth 4G/5G standards.
This HAT supports global bands of NB-IoT and Cat-M, as well as positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
Features
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
Supports GNSS positioning (GPS, GLONASS, BeiDou, and Galileo)
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper
SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available)
3x LED indicators, easy to monitor the working status
Baudrate: 300~3686400 bps
Common baudrate auto-negotiation: 9600/19200/38400/57600/115200 bps
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Communications Specifications
NB-IoT
Cat-M (eMTC)
Band
NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85
Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85
Emitting power
Class 5 (0.125W@LTE)
Data rate
Uplink≤150kbps
Downlink≤136kbps
Uplink≤1119kbps
Downlink≤589kbps
Supported SIM Card
NB-IoT / Cat-M card (1.8V SIM card ONLY)
Applicable region
Global
GNSS Specifications
Receiver type
16-channel
C/A code
Bands
GNSS L1: 1575.42±1.023MHz
GLONASS: 1597.5~1605.8 MHz
BeiDou: 1559.05~1563.14 MHz
Galileo L1: 1575.42±1.023MHz
Update frequency: 1 Hz (default)
Data format: NMEA-0183
Antenna: active antenna
Other Specifications
Power supply voltage: 5V
Logic level: 5V / 3.3V (configured via jumper)
Overall current (idle mode): 39mA
Module sole current (VBAT=3.8V):
Idle mode: 10mA
Sleep mode: 1.2mA
PSM mode: 3.2uA
eDRX mode: 0.59mA (eDRX=81.92s)
Operating temperature: -40°C ~ 85°C
Storage temperature: -45°C ~ 90°C
Dimension: 30.2mm x 65mm
Example
Note: the Raspberry Pi in photo is NOT included.
Dimensions
Development Resources
Wiki :
www.waveshare.com/wiki/SIM7080G_Cat-M/NB-IoT_HAT
Package Contains
SIM7080G Cat-M/NB-IoT HAT x1
LTE antenna x1
GPS External Antenna (B) x1
USB type A plug to micro plug cable x1
2×20PIN female header x1
RPi screws pack (2pcs) x1