Raspberry Pi Pico Microcontroller Board Kit with 1.14" IPS Screen USB Cable Pins

Description

Raspberry Pi Pico Microcontroller Board Kit with 1.14" IPS Screen USB Cable Pins
Package included:
1 * Raspberry pi Pico
1 * 1.14" IPS LCD Color Screen
1 * USB cable
2 * Pins
Parameters for Pico:
21mm x 51mm form factor
RP2040 microcontroller chip designed by Raspberry pi in UK
Dual-core Arm Cortex-M0+ Processor, flexible clock running tup to 133MHz
264KB on-chip SRAM
2MB on-board QSPI Flash
26 multifunction GPIO pins, including 3 analogue inputs
2 x UART, 2 x SPI controllers, 2 x I2C controllers, 16 x PWM channels
1 x USB 1.1 controller and PHY, with host and device support
8 x Programmable I/O (PIO) state machines for custom peripheral support
Supported input power 1.8-5.5V DC
Operating temperature -20℃ to +85℃
Castellated module allows soldering direct to carrier boards
Drag-and-drop programming using mass storage over USB
Low-power sleep and dormant modes
Accurate on-chip clock
Temperature sensor
Accelerated integer and floating-point libraries on-chip
Parameters for 1.14" Screen
Working voltage: 2.6~5.5V
Working current: 40mA
Screen type: IPS
Resolution: 240 x 135 pixels
Display size: 24.91 x 14.86mm
Control chip: ST7789
Dimensions: 52 x 25mm
Interface instruction:
Communication Protocol: