SIM7600A-H 4G 3G GNSS HAT for Raspberry Pi North America LTE CAT4 SMS HTTP

Description

This auction is for
SIM7600A-H 4G HAT
4G/3G/GNSS HAT for Raspberry Pi, Based on SIM7600A-H
Applicable Region
SIM7600A-H is mainly applicable in North America (US, CA, MX), SIM7600E-H is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE-T is mainly applicable in China.
Please check the supported bands according to your local service provider, select the proper one when placing order.
Overview
The SIM7600A-H 4G HAT is a 4G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Features
Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
Supports GPS, BeiDou, Glonass, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Onboard CP2102 USB to UART converter, for serial debugging
Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports 1.8V/3V SIM card
Onboard audio jack and audio decoder for making telephone call
2x LED indicators, easy to monitor the working status
Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baudrate: 9600bps ~ 115200bps
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit: SAT Class 3, USAT
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Communications Specifications
LTE
WCDMA / TD-SCDMA / CDMA 2000
EDGE
GSM/GPRS
Band
SIM7600A-H:
-- LTE-FDD B2/B4/B12
SIM7600A-H:
-- UMTS/HSPA+ B2/B5
Not available
SIM7600E-H:
-- LTE-FDD B1/B3/B5/B7/B8/B20
-- LTE-TDD B38/B40/B41
SIM7600E-H:
-- UMTS/HSPA+ B1/B5/B8
GSM/GPRS/EDGE 900/1800 MHz
SIM7600CE-T:
-- LTE-TDD B38/B39/B40/B41
-- LTE-FDD B1/B3/B8
SIM7600CE-T:
-- UMTS/HSDPA/HSPA+ B1/B8
-- TD-SCDMA B34/B39
-- CDMA 1X/EVDO BC0
Generation
4G
3G
2.5G
2G
Emitting power
0.25W
0.5W@EGSM900
0.4W@DCS1800
2W@GSM900
1W@DCS1800
Data Speed
LTE CAT 4
Uplink≤50 Mbps
Downlink≤150 Mbps
UMTS
Uplink≤384Kbps
Downlink≤384Kbps
EDGE
Uplink≤236.8kbps
Downlink≤236.8kbps
GPRS
Uplink≤85.6kbps
Downlink≤85.6kbps
HSPA+
Uplink≤5.76Mbps
Downlink≤42Mbps
SIM Card
Normal SIM (Not Included)
GNSS Specifications
Receiver type
16-channel
C/A code
Sensitivity
Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
Cold starts: -148 dBm
Time-To-First-Fix (open air)
Cold starts: <35s
Hot starts: <1s
Accuracy
Position: <2.5m CEP
SMS and Audio Specifications
SMS
Supported types: MT, MO, CB, Text, PDU
Storage: USIM card and ME (default)
Audio feature
Supports echo cancellation
Supports noise reduction
Other Specifications
Power supply: 5V
Operating voltage: 5V/3.3V (configured via jumper)
Operating temperature: -30°C ~ 80°C
Storage temperature: -45°C ~ 90°C
Dimension: 56.21mm x 65.15mm
What's on Board
SIM7600A-H
CP2102 USB to UART converter
NAU8810 audio decoder
TXS0108EPWR voltage translator:
translates 3.3V/5V into 1.8V
MP2128DT power chip
MP1482 power chip
Raspberry Pi GPIO header:
for connecting with Raspberry Pi
SIM7600 control interface:
for connecting with host boards like Arduino/STM32
SIM card slot:
supports 1.8V/3V SIM card
3.5mm earphone/mic jack
USB interface:
for testing AT Commands, getting GPS positioning data, etc.
USB to UART interface:
for serial debugging, or login to Raspberry Pi
MAIN antenna connector
AUX antenna connector
GNSS antenna connector
Power switch
Network status indicator
Power indicator
Operating voltage selection jumper:
VCCIO - 3.3V: set operating voltage as 3.3V
VCCIO - 5V: set operating voltage as 5V
UART selection jumper:
A: access Raspberry Pi via USB to UART
B: control the SIM7600 by Raspberry Pi
C: control the SIM7600 via USB to UART
Dimension
Development Resources
Wiki :
www.waveshare.com/wiki/SIM7600A-H_4G_HAT
Package Contains
Note: the Raspberry Pi in the photo is NOT included.
SIM7600A-H 4G HAT x1
LTE Antenna x1
GPS External Antenna (B) x1
USB type A plug to micro plug cable x2
RPi screws pack (2pcs) x1
1
2
3
4
5
Terms & Conditions
Payment:
· Paypay is the only payment method we currently accept. If you want to pay by other way, please contact with us directly.
Shipping:
· All items will be shipped within 48 hours after receiving your payment.
· Please make sure your delivery details are correct,especially the Address,Zip Code and Tel Number.
· Your order will be shipped according to the service you choose, if you choose Standard Shipping, your package will be shipped by epacket/Singapore Post/Deutsche Post/SpeedPak, etc, if you choose Expedited Shipping, your package will be shipped by e-EMS, DHL, Fedex, etc. we will choose the best logistice method for you, all orders can be tracked with a tracking number.
Feedback:
· Your shopping experience is very important to us and our business. We would like to invite you to leave positive feedback on our products and service if you are satisfied with our total service as well as our products,it is also a great way to help others make purchases like yours!
·
If you are unsatisfied with any aspect of our service, please contact us first so we can try to resolve your problem.
Others:
· Any question, you are always welcome to contact with us directly, we will reply you asap.