STM32 MCU Core Board Core746I STM32F746IGT6 IO Expander JTAG/SWD Interface

Description

This auction is for
Core746I
STM32 STM32F746IGT6 MCU core board, full IO expander, JTAG/SWD debug interface
Overview
Core746I is an STM32 MCU core board designed for
STM32F746IGT6
, supports further expansion. It is ideal for starting application development with STM32F family.
Minimal ready-to-run system, integrates clock circuit, USB power management, USB connector, etc.
Onboard 64M Bit SDRAM
All the I/O ports are accessible on the pin headers
JTAG/SWD programming/debugging interface
2.0mm
header pitch, allowed to be plugged-in your application board
What's on the Core746I
STM32F746IGT6:
the high performance STM32 MCU which features:
Core:
Cortex-M7 32-bit RISC + FPU + Chrom-ART graphic accelerator
Feature:
single-cycle DSP instructions
Operating Frequency:
216MHz, 462 DMIPS/2.14 DMIPS/MHz
Operating Voltage:
1.7V-3.6V
Package:
LQFP176
Memories:
1024kB Flash, 320+16+4kB SRAM
MCU communication Interfaces:
6 x SPI, 4 x USART, 4 x UART, 3 x I2S, 4 x I2C
2 x CAN, 1 x QUAD-SPI, 1 x DCMI, 2 x SAI
1 x FMC, 1 x SDMMC, 14 x TIM , 1xLPTIM
1 xLCD-TFT, 1xSPDIFRX, 1xHDMI-CEC
1 x USB 2.0 OTG FS
1 x USB 2.0 OTG HS (supports external HS PHY through ULPI)
1 x 10/100 Ethernet MAC
AD & DA converters:
3 x AD (12-bit); 2 x DA (12-bit)
Debugging/Programming:
supports JTAG/SWD interfaces, supports IAP
IS42S16400J:
SDRAM 1 Meg Bits x 16 Bits x 4 Banks (64-MBIT)
MIC2075:
onboard USB power management device
AMS1117-3.3:
3.3V voltage regulator
8M crystal
32.768K crystal,
for internal RTC with calibration
Reset button
VBUS LED
Power indicator
Power supply switch,
powered from 5Vin or USB connection
Boot mode selection,
for configuring BOOT0 pin
JTAG/SWD interface:
for debugging/programming
USB connector,
supports Device and/or Host
MCU pins expander,
VCC, GND and all the I/O pins are accessible on expansion connectors for further expansion
Power jumper
VBAT: short the jumper to use system power supply, open it to connect external power, such as battery
VREF: short the jumper to connect VREF+ to VCC, open it to connect VREF+ to other custom pin via jumper wire
OTG jumper
short the jumper when using USB OTG/HOST
open the jumper to disconnect from related I/O port
Note: Core746I provides JTAG/SWD debugging interface, yet does NOT integrate any debugging function, a debugger is required.
JTAG/SWD interfaces
The figure 1, and 2 show the header pinouts of JTAG/SWD interface
Figure 1.
JTAG Header Pinout
Figure 2.
SWD Header Pinout
Development Resources
Schematic
Demo code (examples in C, FreeRTOS, μC/OS-III)
STM32 development software (KEIL, STM32CubeMX, etc.)
STM32 datasheets
STM32 development documentations
Wiki:
www.waveshare.com/wiki/Core746I
Dimensions
Package Contains
Core746I x 1
USB type A plug to micro B plug cable x 1
Software CD x 1
1
2
3
Terms & Conditions
Payment:
· PayPal is the only method of payment that we accept.
Shipping:
· We ship items to Worldwide!
· Please confirm your address in paypal,
phone number
is also very important.
· All items will be shipped within 48 working hours on receipt of cleared payment.
· We'll add a tracking number after sending the item so that you can track your parcel.
Returns Policy:
· We are happy to return any unused item in its original packaging within 14 days of delivery.
· Buyers are responsible for the round(two-way) shipping cost.
Feedback:
· We'll leave POSITIVE FEEDBACK on receipt of cleared payment.
· If you're satisfied with the item and our service, please leave POSITIVE FEEDBACK, it's important to us.
·
Once any  problems occured, please contact us first. We'll try our best to work things out.
FAQ:
·
More details(Click)
If you have any question, please feel free to contact us. It's our pleasure to serve you!
We appreciate your business!