STM32F103C8T6 Cortex-M3 STM32 Minimum System Development Core Board For Arduino

Description

STM32F103C8T6 Cortex-M3 STM32 Minimum System Development Core Board For Arduino
Description:
STM32F103C8T6 Core Board
1.Control Chip:STM32F103C8T6
2.Operating Chip:5V
3.Extensible Interface:WIFI ESP8266/NRF24L01/WS1053 W5500 interface
4.Flash:W25X16
5.EEPROM:ATMEL24C02
Package Included:
1PC*STM32F103C8T6 ARM Minisystem Development Board STM32 Development Core Board
STM32F103C8T6 Controller
Kernel: ARM 32-bit Cortex ™ -M3 CPU
- Up to 72MHz operating frequency
- Single cycle multiplication and hardware division
Memory
- from 64K or 128K bytes of Flash program memory
- up to 20K bytes of SRAM
Clock, reset and power management
- 2.0 ~ 3.6 V power supply and I / O pins
- Power-on / Power-down Reset (POR / PDR), Programmable Voltage Monitor (PVD)
- 4 ~ 16MHz crystal oscillator
- Built-in factory-adjusted 8MHz RC oscillator
- Built-in calibrated 40kHz RC oscillator
- the PLL that generates the CPU clock
- 32kHz RTC oscillator with calibration function
Low power consumption
- sleep, stop and standby modes
- V BAT powers the RTC and back-up registers
2 12-bit analog-to-digital converters, 1us conversion time (up to 16)
- Conversion range: 0 to 3.6V
- Double sampling and hold function
- temperature sensor
DMA:
- 7-channel DMA controller
- Supported peripherals: timers, ADC, SPI, I 2 C and USART
Up to 80 fast I / O ports
- 26/37/51/80 I / O ports, all I / O ports can be mapped to 16 external interrupts; almost all ports can tolerate 5V signals
Debug mode
- Serial single line debug (SWD) and JTAG interface
Up to 7 timers
- 3 16-bit timers, each with up to 4 channels for input capture / output compare / PWM or pulse count and incremental encoder inputs
- 1 16-bit PWM controller with dead-zone control and emergency brake for motor control
- 2 watchdog timers (standalone and window type)
- System time timer: 24-bit self-decrement counter
Up to 9 communication interfaces
- Up to 2 I 2 C interfaces (SMBus / PMBus supported)
- Up to 2 USART interfaces (ISO7816 interface, LIN, IrDA interface and modem control) Up to 2 SPI interfaces (18Mbit / s)
- CAN interface (2.0B active)
- USB 2.0 full speed interface
CRC calculation unit, 96-bit chip unique code
Package Included:
1PC*STM32F103C8T6 Micro USB controller STM32 Development ARM Learning Board
STM32F103C8T6 System Board
1.Control Chip:STM32F103C8T6 Minimum System Board
2.Operating Chip:5V
3.Extensible Interface:WIFI ESP8266/NRF24L01/WS1053 W5500 interface
4.Flash:W25X16
5.EEPROM:ATMEL24C02
Package Included:
1PC*STM32F103C8T6 ARM Minisystem Development Board STM32 Development Core Board
1PC*USB Cable
1PC*Dupont Cable
Cortex-M3 STM32F103C8T6
1. Chip board STM32F103C8T6
2. Board JTAG interface and reset button
3. The onboard crystal 32.768KHZ and 8MHZ
4. With 5V to 3.3V chip AMS1117-3.3
5. With a group of UART serial interfaces
6. All I/O all the leads, and mark the I/O name
7. On-board Mini USB interface, you can give the board power supply and USB communication
8. Board size 52.1 (mm) x35.5 (mm)
Package:1x ARM Cortex-M3 STM32F103C8T6 STM32 Minimum System Development Board
STM32F103C8T6 Minimum System
Brand new and high quality.
Model: STM32F103C8T6.
Core: ARM 32 Cortex-M3 CPU.
Debug mode: SWD.
72MHz work frequency.
64K flash memory, 20K SRAM.
2.0-3.6V power, I/O.
Reset(POR/PDR).
4-16MHz crystal.
Micro USB connector , you can give the board power supply and USB communication.
Size:5.3cm x 2.2cm.
Package Included:
1PC*STM32F103C8T6 ARM STM32 Minimum System Development Board Module For Arduino
STM32F103C8T6 IC
Core processor: ARM ® Cortex ™-M3
Core Size: 32bit
Processor speed: 72MHz
Input / Output: 37
Program Memory capacity: 64KB (64K x 8)
Program Memory Type: Flash
Voltage - Power supply: (Vcc / Vdd) 2 V ~ 3.6 V
Data Converters: A / D 10x12b
Oscillator Type: External, Internal
Operating temperature: -40 ° C ~ 85 ° C
Package / Case :48-LQFP
Input / Output lines: 32
Package Included:
1PC*STM32F103C8T6 STM32F103 STM32 LQFP48 MCU ARM ST IC
STM32F103C6T6
STM32F103C6T6
Flash
32K
RAM
10K
Timer
3 （Without timer 4)
Serial ports
2 （Without serial port 3）
1. One STM32F103C6T6 main chip
2. SMD 8M crystal oscillator (up to 72M through the internal PLL of the chip) ST official standard parameters
3. 3.3V voltage regulator chip, maximum 800mA current
4. One miniUSB interface, which can supply power to the system version and reserve USB communication function
5. Reset button
6. One standard SWD port, support JLink, STLink, JLINK OB
7. BOOT select port
8. IO extension header 20pin x 2
9. 1 power indicator
10. One function indicator, used to verify the basic functions of the IO port
11. Reserve a serial port for easy connection with the 5V development board, and you can use the serial port to program
12. High-performance Epson 32768Hz crystal oscillator, the price is 10 times the price of in-line crystal oscillator, easy to start vibration
13. 10K RAM, 32K ROM, TQFP48 package
Shipping
Feedback
Contact us
Return Policy
Shipping
Domestic
We believe you need to get your purchases as quick as possible. As a general rule your item will be shipped within 24 hours of you purchasing it. We pack and post from Tuesday to Sunday (Mondays we are closed) but definitely get all our mail off to the post office first thing Monday morning for you. Mail gets picked up at 12pm so chances are if you buy before lunchtime your item will leave the same day.
International
Same as above but understand that depending on what part of the world you are from it does take a little longer to send, delivery can be from 7-15 working days. Also other factors to take into consideration are quarantine and customs regulations in your country. It is also a consideration that customs duties and GST/VAT may be payable at the buyers expense.
Combined Postage (for items with shipping charges):
We are more than happy to combine postage, just use the Buy it Now function in eBay (but DO NOT PAY after purchasing each item) to buy all the products you need, when you have finished request a combined invoice, we will base the shipping cost on the size, weight and your location.
Feedback
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "
Delivery on time
" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the "
Ask the seller a question
" link on eBay.
Your Satisfaction is our Priority. Our goal is to make all our customers as happy as possible while shopping with us.
Contact us
For anything problem about product, price, shipping or order status, pleasecontact us via eBay message.Just contact us using the "
Ask the seller a question
" link on eBay.
We expect positive feedback and 5 scores DSR  from you.
Return Policy
We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
Please include your eBay ID and item number with any email requests.