STM32F767 Development Board Cortex M7 Small System Board STM32F767IGT6 STM32 DB

Description

STM32F767 Development Board Cortex M7 Small System Board STM32F767IGT6 STM32 Development Board
Introduction
The STM32F767 development board is a Cortex-M7 development board designed for the high-performance STM32F7 series. STM32F7671GT6 series newly launched MCU with high-performance Cortex-M4F core, based on RISC architecture, operating frequency up to 216MHz, and also with single-precision floating-point arithmetic unit, icing on the cake for your project; and also contains a complete set of DSP arithmetic instructions and memory Protection unit.
Parameter
Onboard: STM32F767IGT6 chip
Kernel: Cortex-M7 32-bit RISC;
Features: single cycle DSP instruction;
Operating frequency: up to 216MHz;
Working voltage: 1.8V-3.6V;
Package: LQFP176;
Storage resources: 1024kB Flash, 320kB SRAM;
Resources: 6xSPI, 4xUSART, 4xUART, 3xI2S, 1 x SAI,3x|2C; 1 xFMC, 1 x SDIO, 2x CAN;
1 X USB 2.0 FS/HS controller (with dedicated DMA);
1XUSB HS ULPI (for external USB HS PHY);
1 x 10/100 Ethernet MAC;
3xAD (12 bits, 1us, time-sharing 24 channels), 2xDA (12 bits);
TIM timer: 10X general-purpose timer, 2X advanced timer, 2X basic timer, 1X low-power timer.
Data access FLASH: W25Q128/16MB
Buttons: 1 reset button, 1 function button
LED: 1 power indicator, 1 programmable LED
The basic circuit of the onboard MCU, including 25MHz, 32.768 MHz crystal oscillator circuit, USB power management circuit, USB interface, etc.
SDRAM: IS42S16400J-7TLI/8MB
Except for the onboard SDRAM and GPIO occupied by SPIFLASH, all the other I/O peripheral pins are led out in the form of 2.54mm pin headers, and various resources of the chip can be used at will
With JTAG/SWD debug download interface
Four-layer board technology, more stable performance
Board size: 62*69.5mm
Board weight: 23g
Interface Description
1. D2: Power indicator
2. RESET: Reset button
3. J6: USB interface
4. KEY: User button
5. 25MHz X 32.768MHz crystal oscillator
6. Flash: W25Q128 16MB
7. 3.3V voltage regulator device
8. Two rows of 2x27 pin headers, a total of 108 pins, of which 97 are GPIO, and 11 are power and GND
9. STM32F429IGT6 chip
10.ISP interface: 3V3: working voltage positive; GND: working voltage negative; TX: module serial port sending pin (that is, PA9); RX: module serial port receiving pin (that is, PA10);
11. JTAG/SWD debugging interface
12. D1: User LED.
13. SDRAM: IS42S16400J-7TLI 8M
Package
1pcs STM32F767 development board
Payment Details
We only accept Paypal Payment.
We will send the item to you as soon as you won and paid.
Delivery Details
We provide standard shipping to international via China Post airmail or Hongkong Post airmail with tracking number.Contact us if not receive items.
We only ship to the approved address given in Paypal Payment.Please make sure payment address in Paypal is correct.Any non-received items caused by invalid address registered on Paypal are not in our full refund or replacement policy.
Returns and Replacements
We accept returns and replacements within 30 days from the day the cutomer receive the products.Please make first contact within 30 days from receiving the order.Products should be returned in original condition.
About Feedback
We will try our best to solve any dispute and satisfy our customers.
Please contact us firstly if you have any problems.As you know,a negative feedback can deal nothing and the positive feedback is very important for us.So we hope to your understanding.And we will appreciate if  you would like to contact us for solving your problems well.Thanks!