-40%

Waveshare SX1262 LoRa HAT for Raspberry Pi Spread Spectrum Modulation 915MHz

$ 15.85

Availability: 35 in stock
  • Condition: New
  • Refund will be given as: Money back or replacement (buyer's choice)
  • All returns accepted: Returns Accepted
  • Model: SX1262 915M LoRa HAT
  • MPN: SX1262 915M LoRa HAT
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • Brand: Waveshare

    Description

    This auction is for
    SX1262 915M LoRa HAT
    SX1262 LoRa HAT for Raspberry Pi, Spread Spectrum Modulation, 915MHz Frequency Band
    Overview
    This is a Raspberry Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.
    By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
    Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.
    Features
    Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
    Onboard CP2102 USB TO UART converter, for serial debugging
    Brings the UART control interface, for connecting host boards like Arduino/STM32
    4x LED indicators, easy to check the module status
    LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference
    Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region
    Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications
    Customizable communication key which won't be retrieved, greatly improves the security of user data
    Supports LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment
    Supports RSSI signal intensity indicating, for evaluating signal quality, tuning the network
    Supports wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter
    Supports fixed-point transmission, broadcast, signal channel monitor
    Comes with development resources and manual (examples for Raspberry Pi/STM32)
    What's on Board
    SX1262 LoRa module
    74HC125V:
    voltage level translator
    CP2102:
    USB TO UART converter
    Raspberry Pi GPIO connector:
    for connecting with Raspberry Pi
    USB TO UART port
    UART header:
    for connecting host boards like STM32/Arduino
    SMA antenna connector
    IPEX antenna connector
    Indicators:
    RXD/TXD: UART RX/TX indicator
    AUX: auxiliary indicator
    PWR: power indicator
    UART selection jumpers
    A: control the LoRa module through USB TO UART
    B: control the LoRa module through Raspberry Pi
    C: access Raspberry Pi through USB TO UART
    LoRa mode selection jumpers
    short M0, short M1: transmission mode
    short M0, open M1: configuration mode
    open M0, short M1: WOR mode
    open M0, open M1: deep sleep mode
    Development Resources
    Wiki :
    www.waveshare.com/wiki/SX1262_915M_LoRa_HAT
    Selection Guide
    SX1268 470M LoRa HAT
    SX1268 433M LoRa HAT
    SX1262 868M LoRa HAT
    SX1262 915M LoRa HAT
    RF module
    SX1268
    SX1262
    Frequency band
    410.125 ~ 493.125MHz
    850.125 ~ 930.125MHz
    Antenna
    470MHz antenna (2dBi)
    433MHz antenna (2dBi)
    868MHz antenna (2dBi)
    915MHz antenna (2dBi)
    Radio rate
    0.3kbps ~ 62.5kbps (programmable)
    Transmit power
    22.0dBm (10/13/17/22dBm programmable)
    Receive sensitivity
    -147dBm (radio rate 2.4kbps)
    Power consumption
    Transmit current: 110mA (transient consumption)
    Receive current: 11mA
    Sleep current: 2uA (LoRa module software shutoff)
    Transmit current: 133mA (transient consumption)
    Receive current: 11mA
    Sleep current: 2uA (LoRa module software shutoff)
    Communication interface
    UART (TTL level)
    Baudrate
    1200bps ~ 115200bps (9600bps by default)
    Packet length
    240 Byte (32/64/128/240 Byte programmable)
    Cache
    1000 Byte
    Experimental range
    5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)
    Power supply
    5V
    Logic level
    3.3V/5V
    Operating temperature
    -40~85℃
    Applications
    smart home, industrial sensors, building automation, smart meters, and more other IoT applications
    Applicable region
    China
    Europe, Asia, Africa
    America, Oceania, Asia
    Note: for reference only, please confirm the local supported LoRa bands before placing order.
    Package Contains
    SX1262 915M LoRa HAT x1
    USB type A plug to micro plug cable x1
    915MHz antenna x1
    1
    2
    3