World Products S/R 67cc Cylinder Head 1.94/1.5 Complete

Description

The raised valve cover rails to eliminate oil leaks, Includes hardened steel exhaust seats for unleaded gasoline, They have extra-thick decks and walls for improved reliability, Will accept early style perimeter or late model center bolt valve covers, These Small Block Chevy heads feature large intake & exhaust runners like double hump head
World Products S/R 67cc Cylinder Head 1.94/1.5 Complete
Sku # 824194-67-COMP
Mfr. Part # 824194-67-COMP
Condition
New
Brand
World Products
Sold
Each
Details
Notes
Use 14 mm-5/8", .460 reach, taper seat spark plugs.
Info
More performance and less expensive than rebuilding used heads. No more searching junkyards looking for cylinder heads for your motor.Looks like the smog head on the outside, but has racing head features like an extra-thick deck, screw-in rocker arm studs, and raised valve cover rails.
Large intake & exhaust runners like double hump head
Extra-thick decks and walls for improved reliability
Hardened steel exhaust seats for unleaded gasoline
Machined for 3/8" screw in studs (included)
Raised valve cover rails to eliminate oil leaks
Accepts early style perimeter or late model center bolt valve covers
Can be milled for large springs
Assembled Heads Add:
Heavy Duty S.S. Valves
Steel Retainers & Locks
1.25" Hi-Po Valve Springs
3 Angle Valve Job
67 cc / 1.94 intake head is World Products # 4361
76 cc / 1.94 intake head is World Products # 4360
Head Flow
@ .500 Lift
220 intake, 151 exhaust (Super Flow 1050)
232 intake, 161 exhaust (Super Flow 600)
All heads flowed with a standard .750" intake plate, without exhaust tube, and 28" of water.
S/R Head Application Chart (GIF)
Item Details
Straight Plug, 1.94/1.50 Valves
Specs
Casting ID Number: I-052, I-058
Material: High density cast iron
Valve Seats: Intake (integral), exhaust (hardened)
Valve Guides: Integral cast iron
Spring Seats: Machined for 1.560" and 1.250"
Valve Diameter: 11/32" stem
Rocker Arm Studs: Screw-in style
Rocker Arms: 1.5 ratio (use of 1.6 ratio will require elongation of pushrod holes)
Intake Runner: 170cc, standard port location
Exhaust Ports: 65cc, standard location
Spark Plug: 14mm 5/8" .460" reach tapered style
Valve Job: Multi-angle intake and radiused exhaust
Valve Cover Rail: Raised w/ perimeter and center bolt pattern
Valve Angle: Stock 23°
Accessory Bolt Holes: Stock
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Sold in Quantity
Each
Finish
Natural
Cylinder Head Style
Assembled
Material Type
Cast Iron
Combustion Chamber Volume
67cc
Intake Runner Volume Range
170cc - 179cc
Exhaust Runner Volume Range
60cc - 69cc
Combustion Chamber Volume Range
60cc - 69cc
Exhaust Runner Volume
65cc
Intake Runner Volume
170cc
Related Items / Suggested Parts
World S/R Small Block Chevy Cylinder Heads, Straight Plug, 2.02/1.60 Valves
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.