XBee-PRO 802.15.4 RF 2.4GHz Module, 63 mW, U.FL Connector

Description

XBee-PRO 802.15.4 RF 2.4GHz Module, 63 mW, U.FL Connector
XBP24-AUI-001
XBee-PRO 802.15.4 OEM RF modules are embedded solutions providing wireless end-point connectivity to devices. These modules use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and predictable communication timing.
Part of the XBee family of wireless products, these modules are easy to use, share a common footprint, and are fully interoperable with other XBee products utilizing the same technology. This allows different XBee technologies to be drop-in replacements for each other; you can switch from 802.11 to 802.15.4, ZigBee, DigiMesh and proprietary long-range with minimal development time or risk.
Note: This module is certified for use in North America and Australia only. It is permissible to use in most of Europe if you set the PL command to 0, reducing the power output to
10 mW / 10 dBm.
This module cannot be used in Japan under any circumstances; the Japanese market has a specific
10mW-max
variant. See the User Manual for specific restrictions and end-product label requirements. Other areas, check local regulations.
2.4GHz 802.15.4 RF Module Features
Power output: 63mW (+18 dBm)
Indoor/Urban range: Up to 300 ft (90 m)
Outdoor/RF line-of-sight range: Up to 1 mile (1.6 km) RF LOS
RF data rate: 250 Kbps
Interface data rate: Up to 115.2 Kbps
Operating frequency: ISM 2.4 GHz
Receiver sensitivity: -100 dBm
Spread Spectrum type: DSSS (Direct Sequence Spread Spectrum)
Networking topology: Point-to-point, point-to-multipoint, & peer-to-peer
Error handling: Retries & acknowledgments
Filtration options: PAN ID, Channel, and 64-bit addresses
Channel capacity: 12 channels
Addressing: 65,000 network addresses available for each channel
Supply voltage: 2.8V - 3.4V DC (Footprint Recommendation: 3.0V - 3.4V DC)
Transmit current: 215 mA (@ 3.3V)
Receive current: 55 mA (@ 3.3V)
Power-down sleep current: <10 µA at 25°C
Frequency band: 2.4000 - 2.4835 GHz
Interface options: 3V CMOS UART
Size: 0.960 in × 1.297 in (2.438 cm × 3.294 cm)
Weight: 0.10 oz (3g)
Operating temperature: -40°C to 85°C (industrial)
Certifications: FCC (USA), IC (Canada), ETSI (Europe), C-TICK (Australia)
Above specifications for full-power settings only. For Europe @ 10 mW, see user manual.